Inspire and Learn

The Inspire and Learn Series is a “how to” series of videos and blogs which will help you feel confident and in control of your catamaran. We will be explaining; anchoring, docking, rigging, sail trim, maintenance and more.

How to Anchor and Set Up an Anchor Bridle | Ep. 1

In our first episode of the Inspire and Learn Series, catamaran expert Joe Fox talks us through the best technique for a safe and secure anchor, as well as how to set up an anchor bridle.

We go through the step by step process and concentrate on the 6 main components of anchoring onboard a Lagoon 42.

Read More

Catamaran Manoeuvring Tips | Ep.2 P.1

In our second episode of the Inspire and Learn Series, catamaran expert Joe Fox talks us through how to effectively leave a dock with and without a stern spring line. He also goes through a number of tips for manoeuvring a catamaran in confined spaces such as a marina.
this demonstration was done on the Lagoon 42 and is intended to give you confidence in your catamaran handling ability.

Read More

How To Park Your Catamaran | Ep.2 P.2

In our Docking Episode, Part 2 Joe Fox explains how to park your catamaran bow first and stern first.

This demonstration was done on the Lagoon 42 and is intended to give you confidence in your catamaran handling ability.

Read More

How to Perform a Rig Inspection | Ep.3 P.1

In our third episode of the Inspire and Learn series The Multihull Group got rigging specialist Dion Hart to come and guide you through what to look out for in a regular rig check. Dion explains various important areas of your catamaran to inspect and some tips for going up the mast.

Read More

How they set up a rig + Catamaran vs Monohull | Ep.3 P.2

We are excited to share the latest Inspire and Learn Episode with you all, this one is a bit of a different “bonus” video where rigging specialist Dion Hart explain how they set up the rig, differences between catamarans and monohulls and the advantages of Lagoons new rig design.

Read More

How to Sail Trim, Tack, Gybe & use Code Zero on a Catamaran | Ep. 4

For this episode, we had Sam Newton, Americas Cup and Sail GP pro sailor and owner of Rolly Tasker sails join us to give you tips on how to better trim your sails. Sam also walks us through how to tack and gybe with a normal sail set up and how to use the Code Zero.

Read More

Reefing a Mainsail on a Catamaran | Ep. 5

In this episode, we’re going to be looking at reefing and why you use your reefing lines, how the single line reefing on a Lagoon 42 is run, and the processes involved with lowering the sail to reduce your sail area when the wind strength builds.

 

Read More

Engine Maintenance Tool Kit Essentials | Ep. 6 P.1

In this episode, John Gamlin from our exclusive service department VesselTec introduces engine maintenance by showing us what tools, spares, and cleaning equipment he recommends all owners should have on board at all times.

Read More

How to Perform a Routine Engine Check Ep. 6 P.2

In this episode, John Gamlin from our exclusive service department VesselTec explains the simple steps for an engine inspection. John goes down into the engine bay and walks us through WOBBLES and what to do if you find something abnormal.

Read More
Lagoon silhouette

NEED MORE INFORMATION?